
| Service | Description | Cost |
| Tune-Up | Disassemble, clean internal lubrication, de-burr all parts, "time" cylinder on revolver, check internal and external safeties, inspect action on auto pistol, tighten as necessary | $35.00 |
| Action Hone | Glassy smooth polish of contact surfaces of all parts. This is not a "competition action"; rather, spring remains full-power for 100% ignition, on revolver or auto pistol. | $50.00 |
| Hammer Bob | Hammer spur is removed for snag-free draw, and to prevent hammer spur from snagging web of hand or glove in stress shooting, on revolver or auto pistol. | $25.00 |
| Revolver or Double Action Auto Converted To Double Action Only | Gun cannot be thumb-cocked. Protects against civil liability accusations that your gun was "negligently cocked" when criminal suspect was shot (i.e. Florida vs. Officer Luis Alvarez, the highly publicized "video arcade killing trial.") This modification does not include bobbing the hammer spur. | $35.00 |
| Polished Trigger | Serrations on trigger "snag" the finger and pull the gun off target in rapid fire double action shooting. We will remove the sharp edges, round and polish the trigger's contact surface glass-smooth for the kind of control professionals specify for their double action revolvers. Any revolver having an Action Hone should have this done! | $25.00 |
| Chamber Cylinder | Bevel the sharp edge of cylinder on the revolver for easy reloads. | $25.00 |
| Re-chamber to .357M | Check cylinder for faults, stress cracks, and bore out to accept .357M. (On an old-style Ruger SP101, we recommend Federal brand 125/.357M only. Other ammo may be too long!) | $65.00 |
| Square Butt to Round Butt | S&W, K, L, N frame, and Ruger SS | $75.00 |
| Reshape trigger guard: | Custom gun work - example is S&W 645 | $50.00 |
| Available for all models except the M-36 | $125.00 | |
| Murabito Safety | Available for S&W revolvers, this modification changes the cylinder latch into a safety | $119.95 |
| Powder Eater | Available for S&W, Taurus and Ruger revolvers, this modification stops revolvers from binding. | $50.00 |
| Function Test Fire | Gun is tested with our ammunition. | $20.00 |
| Sight-in Gun | Send 50 rounds of your ammunition and magazine. | $20.00 |
| Opening Up Rear Sight | For a fixed-sight gun | $20.00 |
| Complete Disassembly | Inspect for wear, clean, lubricate with gun oil | $25.00 |
| Dry Lube Special | Gun is completely disassembled, de-greased, cleaned, and treated with a dry lubrication system. | $80.00 |
| Dry Lube Deluxe | Gun is completely disassembled, de-greased, cleaned, and treated with a dry lubrication system. Then each part is burnished by hand for the ultimate protection. | $110.00 |
| S&W Auto Double Action Only | Change factory gun to include a slide-mounted safety (parts are included in price) | $75.00 |
| Polishing Throat | Polishing the throat will reduce feeding problems | $25.00 |
| Beveling and Polishing Magazine Well | Polishing the magazine well will facilitate quick insertion of the magazine | $30.00 |
| Magazine Disassembly | Inspect, clean, adjust as necessary | $5.00/mag |
| Recut Muzzle Crown | Removes burrs or damage which increases accuracy | $20.00 |
| Carry Melt | Break all sharp edges on gun (does not include re-bluing on a blued gun) | $75.00 |
| Polish and Adjust Safety | On autoloading pistol for easier operation | $30.00 |
| Recut Forcing Cone | On revolver to 11 degrees | $25.00 |
| Install Colored Insert In Front Sight | Please call for colors available | $25.00 |

Serial number range:
Safety update (This is not the new
Manual Safety for GLOCK®):
Disassemble and:
Cost: $25.00
New York Trigger
Cost: $15.00

Read what our customers think of our gunsmithing services. Send your gun to us today if you want the best gunsmithing available.
Please click here for our shipping policy. We were shipping guns at a standard $35 handling charge per gun, but have discovered that this may not be enough to cover one gun, and may be too much for multiple guns shipped at the same time. For that reason, $35 per gun should be considered an estimate. We want to be fair to our customers and yet protect ourselves from the rising costs of charges from Federal Express.
We insure all guns shipped. Insurance shipping charges are included in the $35 estimate, which includes insurance in the amount of $500. Should your shipment be valued higher, we reserve the right to increase the charge to cover the increased costs of additional insurance. For dealer to dealer shipments, for which ATF regulations differ, please contact us for a shipping charge quote.
Please indicate on your orders to us the value of your gun BEFORE gunsmithing work has been done. We will add the gunsmithing charges for work performed to the appraised value you have given us to determine the amount we will be insuring. If you have not included the amount you think your gun is worth, then you have agreed to the value that we appraise the gun to be worth at the time of shipment.
Please keep in mind that the higher value you place on your gun for shipment the higher the shipping costs. We limit our liability for lost guns to the insured amount. Because of UPS policies in regards to gun shipments, Tarnhelm Supply uses Federal Express exclusively. Please ship your guns to us through Fedex, and be sure to insure your gun properly.
Please be sure you have given us a complete street address that is correct, as well as a telephone number. Guns and gun frames cannot be shipped through the US Mail by non-licensees.
If we are shipping just gun parts to you, the shipment is actual cost plus a $5 handling charge.
Personal checks or money orders are accepted.
,
and
welcome!
Home | Résumés |Other Interesting Web Sites | Guns for Sale
Writers' Corner | Mission Statement | What's New and Not So New
For more detailed information, please write or call:
![]() |
|
|---|---|
| Tarnhelm Supply Co., Inc. | |
| 431 High Street | |
| Boscawen, NH, 03303 | |
| (603) 796-2551 FAX (603) 796-2918 | |
| FFL#:6-02-007-01-6L-34048 | |
| info@tarnhelm.com | |
Copyright © 1996-2007 Tarnhelm Supply Co., Inc. - All Rights Reserved.