BP2000 POWDER is pure powdered lubricants which have a natural affinity for metals. Based on solid lubricant and dry film technology, it is specially prepared with strict controls on particle size and chemical composition. BP2000 is the finest lubricating powder available.
Clean surfaces well; use a cleaner that leaves no residue, or use alcohol to rinse the cleaned surfaces before treating. Allow surfaces to dry. Apply a small amount of BP2000 POWDER to a clean patch or cloth and briskly rub the powder into the metal surface. For tight spaces, dip a cotton swab into powder and work into the surfaces. NOTE: Surfaces treated with BP2000 will have a silvery gray mirror like finish. If in doubt about color, test on an interior surface. To maintain surface: use a dry nylon-bristle brush to remove dirt & residues. Surface can then be touched up with BP2000. BP2000 is not a permanent coating; it can be removed using conventional cleaning solvents. To clean hands the use of a waterless hand cleaner is recommended, followed by mild soap & water. Please Note: Toxicological studies, industrial experience and chemical properties all indicate that BP2000 POWDER is a relatively harmless material.
For more detailed information, please write or call:
|Tarnhelm Supply Co., Inc.|
|431 High Street|
|Boscawen, NH, 03303|
|(603) 796-2551 FAX (603) 796-2918|
Copyright © 1996-2015 Tarnhelm Supply Co., Inc. - All Rights Reserved.